复合型塑胶跑道:底部弹性层由弹性橡胶颗粒与单组分聚氨酯黏合剂塑胶跑道按8:1比例经由专业施工机械铺设，底层施工完毕后用专用填缝胶封闭底层表面，防止面层施工时,PU面胶往下渗漏,面层由专用面胶与EPDM颗粒搅拌后喷涂而成。
Composite plastic runway: by elastic rubber particles and elastic layer at the bottom of the one-component polyurethane adhesive plastic runway via professional construction machinery laid by 8:1 proportion, the construction is completed with special caulking glue sealing the underlying surface, to prevent surface, PU surface glue leakage, down coat by special mixing rubber and EPDM particles after spraying.
运动场地施工:http://www.yj0755.com
Sports venue construction
　补平：用球场专用沥青填充剂补平，填平场内凹陷处,减低积水现象。划线：用丙烯酸白线漆画标准球场界线一道，将胶纸按线紧粘在地面上,防止毛边,用刷子直接刷丙烯酸白线漆涂料一层。
Filling-in: use a stadium dedicated asphalt filling agent filling-in, bridge floor cavity, reduce water phenomenon. Line: use acrylic lacquer painting white line standard pitch line, stick tape according to the line tight on the ground, to prevent the burrs, directly with the brush brush acrylic coating a layer of white paint.
　　底层：用球场专用填充剂全场涂刮一层，充分搅拌后用橡胶刮耙刮涂,形成一层可紧密粘附在原球场地面上的涂层。试水：全场洒水测试场地平整，试水一小时后将地面凹陷超过3mm处用粉笔做记号。
Bottom: with special field filler whole surface layer, with rubber scraper shave besmear after fully mixing, forming a layer can be closely adhere to the coating on the ground in the original stadium. Testing the waters: full water test field leveling, testing the waters the ground depression in an hour more than 3 mm place marked with chalk.
　　加强层：用丙烯酸填充剂全场涂刮，以丙烯酸填充剂兑水掺石英砂。充分搅拌后用橡胶刮耙刮涂。在底层之上再提供一层均匀浓密的垫层,增加球场强度,提高整个球场面层的品质。
Strengthening layer: use acrylic filler to the surface, with acrylic filler water mixing quartz sand. After fully mixing with rubber scraper shave. On the bottom to provide a uniform thick layer of cushion layer, increase the field strength, improve the quality of the whole surface of the stadium.
　　细胶粒层：用丙烯酸细胶粒刮涂，用于丙烯酸粗胶粒层之上。用于找平粗胶粒层的大颗胶粒形成的粗糙表面。使用便提供了平滑的优质弹性层。有利于之后丙烯酸涂料的施工。
Thin colloidal particle layer: fine colloidal particles with acrylic coating, used for acrylic coarse granule layer. Used for leveling coarse granule layer of micelle formation of the rough surface. Use high-quality elastic layer provides a smooth. Is advantageous to the acrylic coating after construction.
　　纹理层：用丙烯酸色料全场涂刮，以丙烯酸色料兑水加石英砂, 充分搅拌后用橡胶刮耙刮涂。使面层有均匀一致的纹理效果,增加耐磨功能及调节球速。
Texture layer: use acrylic pigment to the surface, with acrylic color against the water and quartz sand, fully mixing rubber after scraping rake. Increase the surface with uniform texture effect, wear-resisting function and adjusting velocity.
　　终饰层：用丙烯酸色料全场涂刮，运动场地施工以丙烯酸色料兑水稀释，不加砂充分搅拌后用橡胶刮耙涂刮。使得面层色彩鲜艳悦目，并且对气候和紫外线辐射具有很强的抵抗力,球场面层更美观耐久。
Finishing layer: use acrylic pigment to the surface, sports venue construction with acrylic pigment water dilution, fully mixing rubber after scraping rake without sand surface. Make the surface colorful and pleasing to the eye, and the climate and ultraviolet (uv) radiation has a strong resistance, the pitch surface is more beautiful and durable.