塑胶跑道胶面开裂是很多客户反映的问题，那么如何避免开裂呢？胶面的实铺厚度，从胶面底至表面层胶粒的中心，一般按两方面控制，首先通过立模（靠尺）进行预检，对基层局部高出的地方进行修砍或锤击夯低，如高出不多，修整时采用刮尺上加卡具，离模刮浆，来保证铺装厚度。
Plastic runway surface cracking is many customers reflect the problem, so how to avoid cracking? Glue the real height, from the surface or bottom to the surface of colloidal particles center, general control in two aspects, first of all, through the model to preview (on foot), higher than that of local place to repair the cut at the base or hammer tamping is low, such as higher, add the fixture is used when finishing darby starched from mould, to ensure proper thickness.
球场施工:http://www.yj0755.com
Golf course construction
　　铺胶液的时间要避免早晨大气中和地面湿度较大（相对湿度不超过75%）的时候，即使在晴天也要在上午9时以后铺筑。
Spread glue solution time to avoid the morning air and ground humidity is bigger (relative humidity is not more than 75%), even in sunny day to 9 in the morning after paving.
　　防止胶铺筑后局部打泡，对于基层密度要严格控制，防止沥青砼基层自身嵌挤不实，粘接力较差表面气化，发生胶面被拉断。
Prevent local c paving after glue, for density at the grass-roots level to strictly control, to prevent its embedded squeeze false base of asphalt concrete stick relay with poor surface gasification, plastic surface is pulled.
　　聚氨脂胶面施工时最怕水，胶液在初步固化前碰到一滴水珠就会产生一个大气泡，施工人员在高温下作业，要准备毛巾擦汗，并做好雨季应急防雨措施。
Polyurethane adhesive surface construction, the most afraid of water, adhesive solution before the initial curing touched a drop of water will generate a big bubble, construction personnel operating at high temperatures, to prepare a towel to wipe the sweat, emergency rainproof measures and the rainy season.
　　其中导致塑胶跑道起泡、裂缝的原因有很多，这就需专业的球场施工队和优质的塑胶跑道材料了
Which lead to the causes of cracks on the plastic runway blister, there are a lot of, it's need to professional golf course construction group and the high quality of plastic runway