1、基材铺设：在铺设橡胶颗粒前先涂布一层高粘结胶水，在粘结胶水未凝固前将PU环保固化粘住胶混合环保橡胶颗粒材料按比例搅拌均匀后，置于地面，再用齿状PU耙镘开， 用专用摊铺机按设计厚度机械整平压实，以控制用量和厚度；不平处继续找平；
The 1 substrates: in the laying, laying rubber particles coated with a layer of adhesive glue before, in the bonding glue not solidified before PU environmental protection curing stick glue mixed green rubber particle materials according to the proportion of mixing evenly, on the ground, and then the dentate PU rake - open, with special paver according to the design thickness of mechanical leveling compaction, to control the amount and thickness uneven continue leveling;
2、地面整修：清洁处理地面，除尘除污，找平基层，打磨地面，；
2, the ground Renovation: cleaning ground, dust removal, leveling the ground, polished,;
3、表面颗粒喷涂:将PU面漆混合EPDM橡胶颗粒用专用喷涂机均匀喷撒在黑色橡胶基层之上表面2到3次，务必使颗粒层平整均匀；面漆包裹住EPDM颗粒，以使场地更加耐用；
3, the particles in surface coating: PU topcoat mixed EPDM rubber particles with special spraying machine is uniformly sprayed on the black rubber base surface 2 to 3 times, to make sure the granular layer is smooth; finish wrapped EPDM particles, in order to make the site more durable;
4、划线: 用BSJX0451白色面漆，依设计尺寸喷涂体育线，保证线宽一致，色泽均匀，无虚边出现；
4, marking: BSJX0451 white paint, according to the design size spraying sports line, ensure the linewidth is consistent, uniform color, no false edges appear;
5、防水底油涂布:确认底材已找平，并达含水率不能大于8%可施工程度时，用刷子或滚筒施工高渗透型防水底漆，以使起到加强基础及同面层粘结的能力，起到防水加强及增强粘结的作用。
5, waterproof bottom oil coating: confirm the substrate has been leveling, and moisture content should not be greater than 8% construction degree, high permeability waterproof paint brush or roller construction, so as to serve to strengthen the capacity of foundation and the same surface bonding, to strengthen and enhance the role of waterproof adhesive.